[Mod][App] Onyx - Halo 2 Map Builder
- Ogrish
- Posts: 1512
- Joined: Wed Dec 12, 2007 2:56 am
Re: [Mod][App] Onyx - Halo 2 Map Builder
Ok so what if we add the grab gun so we can push and pull boxs to where we want them.
Then we need a way to select them and see there coords. we could just type it in then.
I tried to do this with the bsp viewer but it wont view this map.
Maybe ill transfer all the blocs and scenerys to another map and try.
Then we need a way to select them and see there coords. we could just type it in then.
I tried to do this with the bsp viewer but it wont view this map.
Maybe ill transfer all the blocs and scenerys to another map and try.
- Grimdoomer
- Admin
- Posts: 1835
- Joined: Sun Dec 09, 2007 9:09 pm
Re: [Mod][App] Onyx - Halo 2 Map Builder
I fixed that prob in entity, I can give you a build for it on AIM. Apparently they thought every map would always have a BSP water definition chunk.Ogrish wrote:Ok so what if we add the grab gun so we can push and pull boxs to where we want them.
Then we need a way to select them and see there coords. we could just type it in then.
I tried to do this with the bsp viewer but it wont view this map.
Maybe ill transfer all the blocs and scenerys to another map and try.
Don't snort the magic, we need it for the network.
- socrates
- Posts: 565
- Joined: Tue May 27, 2008 9:22 pm
- Location: Oklahoma
Re: [Mod][App] Onyx - Halo 2 Map Builder
This is EPIC, too bad no RTH or BSP viewer for meh, I'll definitely mess with this once i get my new computer
Good Job!
Good Job!
- Ogrish
- Posts: 1512
- Joined: Wed Dec 12, 2007 2:56 am
Re: [Mod][App] Onyx - Halo 2 Map Builder
yeah onyx RTH is working, im not using the xbdm for contribute.
Im using this one http://files.filefront.com/xbdmdll/;133 ... einfo.html
Onyx works with it.
Im using this one http://files.filefront.com/xbdmdll/;133 ... einfo.html
Onyx works with it.
- XZodia
- Staff
- Posts: 2208
- Joined: Sun Dec 09, 2007 2:09 pm
- Location: UK
- Contact:
Re: [Mod][App] Onyx - Halo 2 Map Builder
upload it to remnant...Ogrish wrote:yeah onyx RTH is working, im not using the xbdm for contribute.
Im using this one http://files.filefront.com/xbdmdll/;133 ... einfo.html
Onyx works with it.
- [TT]
- Posts: 112
- Joined: Sat Mar 15, 2008 8:14 am
- Contact:
Re: [Mod][App] Onyx - Halo 2 Map Builder
Does this Mod require Yelo or is that optional?
[Contact Me]
[color=#008000]Grimdoomer[/color] wrote: Firts we need to have a purpose for this app
- Dragonfire
- Posts: 1328
- Joined: Thu Feb 21, 2008 9:20 pm
- Location: Michigan, USA
- Contact:
Re: [Mod][App] Onyx - Halo 2 Map Builder
Most mods that "require" Yelo r ones that have AI in them[TT] wrote:Does this Mod require Yelo or is that optional?
- Ogrish
- Posts: 1512
- Joined: Wed Dec 12, 2007 2:56 am
Re: [Mod][App] Onyx - Halo 2 Map Builder
@Xzodia i never uploaded anything directly to remnant so ...
Im not sure how.
@TT Onyx app does not need yelo to work, or a debug xbox. Its good to have both tho.
Speeds up the process. Sorry for the confusion.
Im not sure how.
@TT Onyx app does not need yelo to work, or a debug xbox. Its good to have both tho.
Speeds up the process. Sorry for the confusion.
- XZodia
- Staff
- Posts: 2208
- Joined: Sun Dec 09, 2007 2:09 pm
- Location: UK
- Contact:
Re: [Mod][App] Onyx - Halo 2 Map Builder
viewtopic.php?f=75&t=1247&hilit=ftpOgrish wrote:@Xzodia i never uploaded anything directly to remnant so ...
Im not sure how.
- DemonicSandwich
- Trollwich
- Posts: 1620
- Joined: Sat Dec 08, 2007 9:47 pm
- Location: I...huh...I don't really know. x.x
Re: [Mod][App] Onyx - Halo 2 Map Builder
False. You do need a debug running, otherwise the app cannot edit the items in real time.Ogrish wrote:@TT Onyx app does not need yelo to work, or a debug xbox.
Model Customization Pt.01|Model Customization Pt.02|Bipd Attachments|True Marker Rotations
"I'm the h4x man! Skibby Dibby Dib YoDahDubDub, YoDahDubDub"
"I'm the h4x man! Skibby Dibby Dib YoDahDubDub, YoDahDubDub"
-
- Posts: 1974
- Joined: Sun Jan 27, 2008 4:50 am
Re: [Mod][App] Onyx - Halo 2 Map Builder
He meant that you can still save your changes without the rth part.
In Soviet Russia, DS touches you. Say it again and I'll do more than touch. ~DS -Oh babyDemonicSandwich wrote:See that? You see that how it is highlighted down here but it's not highlighted right there? Ah, I guess that's what I get for pirating it.
A cat was licking itself to the sound of potato chips.
- JacksonCougar
- Huurcat
- Posts: 2460
- Joined: Thu Dec 06, 2007 11:30 pm
- Location: Somewhere in Canada
Re: [Mod][App] Onyx - Halo 2 Map Builder
Completely disregarding the entire point of the application.
- Ogrish
- Posts: 1512
- Joined: Wed Dec 12, 2007 2:56 am
Re: [Mod][App] Onyx - Halo 2 Map Builder
Im just saying for the people who cant get rth to work, that this app is still useful.
I can save, fpt, load map, in about the same time as it takes to poke.
But its much less work, now that I got its RTH working.
I can save, fpt, load map, in about the same time as it takes to poke.
But its much less work, now that I got its RTH working.
- JacksonCougar
- Huurcat
- Posts: 2460
- Joined: Thu Dec 06, 2007 11:30 pm
- Location: Somewhere in Canada
Re: [Mod][App] Onyx - Halo 2 Map Builder
False.Ogrish wrote:Im just saying for the people who cant get rth to work, that this app is still useful.
I can save, fpt, load map, in about the same time as it takes to poke.
But its much less work, now that I got its RTH working.
- [TT]
- Posts: 112
- Joined: Sat Mar 15, 2008 8:14 am
- Contact:
Re: [Mod][App] Onyx - Halo 2 Map Builder
The question i stated was only to ask if i needed Yelo to be ran, another question: is there a way for a secondary video option for a capture card in place in this very sexy application.
[Contact Me]
[color=#008000]Grimdoomer[/color] wrote: Firts we need to have a purpose for this app
- JacksonCougar
- Huurcat
- Posts: 2460
- Joined: Thu Dec 06, 2007 11:30 pm
- Location: Somewhere in Canada
- socrates
- Posts: 565
- Joined: Tue May 27, 2008 9:22 pm
- Location: Oklahoma
Re: [Mod][App] Onyx - Halo 2 Map Builder
how...exactly do you have your xbox connected to your computer/router?....Ogrish wrote:...I can save, fpt, load map, in about the same time as it takes to poke....
nothing really for me to say...I can ftp a map in a minute or so..5 for sp-shared xD
whereas the 'poke/sync' freezes box for a sec or two and then its done....
(Teamviewer+Entity1.6+friend with debug+Xlink Kai=The most ghetto RTH you have ever seen...its still fun)
- XZodia
- Staff
- Posts: 2208
- Joined: Sun Dec 09, 2007 2:09 pm
- Location: UK
- Contact:
Re: [Mod][App] Onyx - Halo 2 Map Builder
bad RTH freezes the box, good RTH is instant.socrates wrote:whereas the 'poke/sync' freezes box for a sec or two and then its done....
(Teamviewer+Entity1.6+friend with debug+Xlink Kai=The most ghetto RTH you have ever seen...its still fun)
- [TT]
- Posts: 112
- Joined: Sat Mar 15, 2008 8:14 am
- Contact:
Re: [Mod][App] Onyx - Halo 2 Map Builder
The funny part about that is that if you use the non debug ip addy it will cause a slow RTH as for the debug its like instant which brings to my attention that it starting to work instantly after putting the right ip addy (The debug ip addy) not the the consoles dashboard addy. Another problem i found was that when streaming the video to your comp it sometimes shows blocks of the image then ends with a error saying that the xbox is either switching processes or has refused to respond, well the thing is when it posts the error my xbox ends up in freeze mode well after 2 hours of playing with the app i realized that it didn't crash it just put itself in freeze mode ROFL. another question is why cant the spawn point of the box's be at the 0 marker of the X,Y,Z axis ?xzodia wrote:bad RTH freezes the box, good RTH is instant.socrates wrote:whereas the 'poke/sync' freezes box for a sec or two and then its done....
(Teamviewer+Entity1.6+friend with debug+Xlink Kai=The most ghetto RTH you have ever seen...its still fun)
[Contact Me]
[color=#008000]Grimdoomer[/color] wrote: Firts we need to have a purpose for this app
-
- Posts: 84
- Joined: Wed Jan 28, 2009 6:41 am
Re: [Mod][App] Onyx - Halo 2 Map Builder
socrates wrote:how...exactly do you have your xbox connected to your computer/router?....Ogrish wrote:...I can save, fpt, load map, in about the same time as it takes to poke....
nothing really for me to say...I can ftp a map in a minute or so..5 for sp-shared xD
whereas the 'poke/sync' freezes box for a sec or two and then its done....
(Teamviewer+Entity1.6+friend with debug+Xlink Kai=The most ghetto RTH you have ever seen...its still fun)
Really? It only takes me like 5-7 seconds to FTP(depending on the size)
- Ogrish
- Posts: 1512
- Joined: Wed Dec 12, 2007 2:56 am
Re: [Mod][App] Onyx - Halo 2 Map Builder
if i dont load my debug bios i can load S.P.shared in 6 seconds, all Mp maps in 3 or less.
when im using onyx it pokes quick most of the time, when im skinning with entity and using other RTH some shaders poke fast, some take 90 seconds or more.
I can mske changes, save use a shortcut to quick reset my xbox fpt all in under a minute, then it takes almost a min for my xbox to load the map.
So my statement wasnt completely true, it was a little sarcasm. But the point is valid.
B4 i got onyx RTH working, i had made good progress on my map by viewing in game after i resized and set many blocs where i thought they should be using simple math, then fpting and viewing to make some minor changes.
So yes my statement was false, i wasnt saying anything bad about the App, i love it
when im using onyx it pokes quick most of the time, when im skinning with entity and using other RTH some shaders poke fast, some take 90 seconds or more.
I can mske changes, save use a shortcut to quick reset my xbox fpt all in under a minute, then it takes almost a min for my xbox to load the map.
So my statement wasnt completely true, it was a little sarcasm. But the point is valid.
B4 i got onyx RTH working, i had made good progress on my map by viewing in game after i resized and set many blocs where i thought they should be using simple math, then fpting and viewing to make some minor changes.
So yes my statement was false, i wasnt saying anything bad about the App, i love it
- bumlove
- Posts: 524
- Joined: Tue Dec 11, 2007 8:10 am
- Location: England I'm not British, I'm English
Re: [Mod][App] Onyx - Halo 2 Map Builder
8.8*'s looks like quality stuff, could there be a future for marker and vectors (also whatever the name for the thing is that determines the placement co-ord on a bloc) for adding bloc to bloc attachments so high detail map maker tile sets can be made and shared
not been reading much recent but been looking for this kinda inspiration
cool name too 8.9*'s
not been reading much recent but been looking for this kinda inspiration
cool name too 8.9*'s
- [TT]
- Posts: 112
- Joined: Sat Mar 15, 2008 8:14 am
- Contact:
Re: [Mod][App] Onyx - Halo 2 Map Builder
Has anyone ever got this application to work?, if so have you gotten the xbox debug communicator to work as in the video part of the application? For some reason every time i start the video streaming it ends up getting a error after 3 or so seconds into the stream.
[Contact Me]
[color=#008000]Grimdoomer[/color] wrote: Firts we need to have a purpose for this app
- Ogrish
- Posts: 1512
- Joined: Wed Dec 12, 2007 2:56 am
Re: [Mod][App] Onyx - Halo 2 Map Builder
Once your debug set up is right boot xbox load debug dash, get debug IP, i set mine so its always the same. then load your other modded dash, (unleash prefered), then either load halo2 or load yelo first then halo2. Load onyx map in halo2, and load the onyx map on your pc in the onyx APP, (make sure to paste your debug IP in settings, under the EDIT button). Make changes in App then hit poke, your in game halo2 map of onyx will freeze then start map over, changes will now show up in game.
- [TT]
- Posts: 112
- Joined: Sat Mar 15, 2008 8:14 am
- Contact:
Re: [Mod][App] Onyx - Halo 2 Map Builder
If i remember right i never had my xbox freeze while poking, The way i did it was run the debug communicator then run the debug app on the xbox which will revert back to my dashboard ofter its splash screen then i would load up halo 2 then have onyx already setup and wallah no freeze when poking except if i push the screen capture button in the debug communicator it'll freeze the xbox after 2 secs after the video stream.
[Contact Me]
[color=#008000]Grimdoomer[/color] wrote: Firts we need to have a purpose for this app