Standalone RTH v2
- Dr Flatulator
- Posts: 51
- Joined: Sat Aug 02, 2008 2:42 pm
- Location: England
- Contact:
Re: Standalone RTH v2
Sorry for the double post, but just to let everyone know, this sometimes doesn't work unless your xbox is connected through a router, it won't work when I have it connected directly to my pc. Don't ask me why, just may not work.
- Dragonfire
- Posts: 1328
- Joined: Thu Feb 21, 2008 9:20 pm
- Location: Michigan, USA
- Contact:
Re: Standalone RTH v2
Prolly something to do with IP or DNSDr Flatulator wrote:it won't work when I have it connected directly to my pc. Don't ask me why, just may not work.
- Dr Flatulator
- Posts: 51
- Joined: Sat Aug 02, 2008 2:42 pm
- Location: England
- Contact:
Re: Standalone RTH v2
Prolly something to do with the way the app was written
-
- Posts: 1974
- Joined: Sun Jan 27, 2008 4:50 am
Re: Standalone RTH v2
If you don't use a static IP on your xbox then it won't work without a router and the IP may change every once in a while if you use a Dynamic IP with a router.Dragonfire wrote:Prolly something to do with IP or DNSDr Flatulator wrote:it won't work when I have it connected directly to my pc. Don't ask me why, just may not work.
Try setting your xbox's IP to a static IP and it should work. I'm not sure about the DNS but is it needed for FTP'ing?
In Soviet Russia, DS touches you. Say it again and I'll do more than touch. ~DS -Oh babyDemonicSandwich wrote:See that? You see that how it is highlighted down here but it's not highlighted right there? Ah, I guess that's what I get for pirating it.
A cat was licking itself to the sound of potato chips.
- OwnZ joO
- Posts: 1197
- Joined: Sun Dec 09, 2007 4:46 pm
Re: Standalone RTH v2
I didn't write the code to communicate with the xbox. Like I said that was written by xbox7887 and Kornman01. I don't know why you had problems, and because they have not released the source code, I probably won't until they do(if they do that is).Dr Flatulator wrote:Prolly something to do with the way the app was written
- Grimdoomer
- Admin
- Posts: 1835
- Joined: Sun Dec 09, 2007 9:09 pm
Re: Standalone RTH v2
I would recommend you use DHCP. Static is a pain in the ass to get to work. Yes you do need the DNS numbers, and the only easy way to get them is to call your ISP.xxpenguinxx wrote:If you don't use a static IP on your xbox then it won't work without a router and the IP may change every once in a while if you use a Dynamic IP with a router.Dragonfire wrote:Prolly something to do with IP or DNSDr Flatulator wrote:it won't work when I have it connected directly to my pc. Don't ask me why, just may not work.
Try setting your xbox's IP to a static IP and it should work. I'm not sure about the DNS but is it needed for FTP'ing?
Don't snort the magic, we need it for the network.
- JacksonCougar
- Huurcat
- Posts: 2460
- Joined: Thu Dec 06, 2007 11:30 pm
- Location: Somewhere in Canada
- Grimdoomer
- Admin
- Posts: 1835
- Joined: Sun Dec 09, 2007 9:09 pm
Re: Standalone RTH v2
That doesnt get you true DNS numbers. I tried.JacksonCougar wrote:Code: Select all
run->ipconfig /all
Don't snort the magic, we need it for the network.
- XZodia
- Staff
- Posts: 2208
- Joined: Sun Dec 09, 2007 2:09 pm
- Location: UK
- Contact:
Re: Standalone RTH v2
So use a different DNS... http://www.opendns.com/
- Dr Flatulator
- Posts: 51
- Joined: Sat Aug 02, 2008 2:42 pm
- Location: England
- Contact:
Re: Standalone RTH v2
If your xbox is plugged directly into your pc you leave the dns fields blank.
If your xbox is rigged via router use dhcp and it does everything for you.
I only used static when plugged in direct to pc, other than that I see no need to use static.
If your xbox is rigged via router use dhcp and it does everything for you.
I only used static when plugged in direct to pc, other than that I see no need to use static.
- Dr Flatulator
- Posts: 51
- Joined: Sat Aug 02, 2008 2:42 pm
- Location: England
- Contact:
Re: Standalone RTH v2
Boom. SuperBump-DoublePost.
Someone please help me with this.
Now using a router. Other RTH apps work, the crap ones, but standalone doesn't.
Screenshot explains all.
http://imgur.com/P9Ufm.jpg
Someone please help me with this.
Now using a router. Other RTH apps work, the crap ones, but standalone doesn't.
Screenshot explains all.
http://imgur.com/P9Ufm.jpg
- OwnZ joO
- Posts: 1197
- Joined: Sun Dec 09, 2007 4:46 pm
Re: Standalone RTH v2
Hmm, have you tried to use it even if it says failed to connect? Could just be me making a coding error, if not I'm not sure what the deal is.
- socrates
- Posts: 565
- Joined: Tue May 27, 2008 9:22 pm
- Location: Oklahoma
Re: Standalone RTH v2
-.- the only halo modding RTH app that works for me is Onyx, no entitys no minirth no standalone not contribute beta whatever..
XIG XDC and XBN work fine.. which isnt really a problem it still beats restarting and ftp'ing.. just means I have to clear my cache by loading another map.
XIG XDC and XBN work fine.. which isnt really a problem it still beats restarting and ftp'ing.. just means I have to clear my cache by loading another map.
- Ogrish
- Posts: 1512
- Joined: Wed Dec 12, 2007 2:56 am
Re: Standalone RTH v2
i installed IE8
not only is it a piece of shit that crashes every 2 mins, but ever sence the install, xxxxRTH wont work for me.
not only is it a piece of shit that crashes every 2 mins, but ever sence the install, xxxxRTH wont work for me.
- Dragonfire
- Posts: 1328
- Joined: Thu Feb 21, 2008 9:20 pm
- Location: Michigan, USA
- Contact:
Re: Standalone RTH v2
teaches u to install their products
- Dr Flatulator
- Posts: 51
- Joined: Sat Aug 02, 2008 2:42 pm
- Location: England
- Contact:
Re: Standalone RTH v2
Yeah, I have, and no luck still.
I'll try removing IE 8 and see if that helps.
This always has happened with me. And I have no idea why...
Perhaps because I used XDI?
I'll try removing IE 8 and see if that helps.
This always has happened with me. And I have no idea why...
Perhaps because I used XDI?
- OwnZ joO
- Posts: 1197
- Joined: Sun Dec 09, 2007 4:46 pm
Re: Standalone RTH v2
Says the guy running windows xp...Dragonfire wrote:teaches u to install their products
- Dragonfire
- Posts: 1328
- Joined: Thu Feb 21, 2008 9:20 pm
- Location: Michigan, USA
- Contact:
Re: Standalone RTH v2
FTW!!!OwnZ joO wrote:Says the guy running windows xp...Dragonfire wrote:teaches u to install their products
- Ogrish
- Posts: 1512
- Joined: Wed Dec 12, 2007 2:56 am
Re: Standalone RTH v2
i got google chrome, kinda fast, but what a piece of shit, andi hate the genaric folder look.
So i fucked around and fixed IE8, it so much better. To Microsoft: (pay me bitch!)
You guys dont know shit. I can do so many things with IE that cant be done with other browsers.
Like get free mp3's without it being tracable.
And dont say index of shit, thats tracable.
But back on topic, I dont know why, but many of us have the same problem, some RTH apps not working. Onyx works, xxxxRTH works, xbox neiborhood works, i can get screen shots with contribue app but rth wont work.
I have to swap to another xbdm for contribute's screen shots.
So i fucked around and fixed IE8, it so much better. To Microsoft: (pay me bitch!)
You guys dont know shit. I can do so many things with IE that cant be done with other browsers.
Like get free mp3's without it being tracable.
And dont say index of shit, thats tracable.
But back on topic, I dont know why, but many of us have the same problem, some RTH apps not working. Onyx works, xxxxRTH works, xbox neiborhood works, i can get screen shots with contribue app but rth wont work.
I have to swap to another xbdm for contribute's screen shots.
- sabu
- Posts: 113
- Joined: Thu Mar 31, 2011 11:24 am
Re: Standalone RTH v2
Is there any word on this working with windows 7?
It seems to open up fine with the version "Vista Maybe", but as soon as I press connect it will just give me an error.
I ask this because I hear this works perfectly fine for others, entity's built in RTH is horrible.
___________________________________________________
Edit: Actually the only version that works for me is "MiniRTH" however that doesn't seem to work on a lot of tags.. just small swaps.
It seems to open up fine with the version "Vista Maybe", but as soon as I press connect it will just give me an error.
I ask this because I hear this works perfectly fine for others, entity's built in RTH is horrible.
___________________________________________________
Edit: Actually the only version that works for me is "MiniRTH" however that doesn't seem to work on a lot of tags.. just small swaps.
- XZodia
- Staff
- Posts: 2208
- Joined: Sun Dec 09, 2007 2:09 pm
- Location: UK
- Contact:
Re: Standalone RTH v2
your missing rthDLL.dll
- sabu
- Posts: 113
- Joined: Thu Mar 31, 2011 11:24 am
Re: Standalone RTH v2
XZodia wrote:your missing rthDLL.dll
I'm afraid not, unless however there's a different dll I should be using? His download already came with it inside the folder's contents.
Nevermind that last question because I don't think the rth that was supplied in this dl is different from entity's because they're both the same